КЛУБ СТОКОВЫХ ФОТОГРАФОВ, ИЛЛЮСТРАТОРОВ, ВИДЕОГРАФОВ и ИИ-ШНИКОВ

Installation:
1) Format the card from the camera.
2) Make sure you are running Canon firmware 1.2.3.
3) Copy ML files on the card and run Firmware Update.

Uninstallation:
1) Run Firmware Update from your ML card.
2) Follow the instructions.

What's hot:
- bootflag issue solved! (p.s. some bloggers got it wrong, you still enable it in the camera, but you can disable it by uninstalling)
- installation is really easy (simply unzip the files on the card, update firmware and you are ready to go)
- uninstallation is equally easy (update firmware and follow the instructions)
- EosCard is now optional
- ML restores itself after formatting the card (man, that komputerbay card is fast!)
- you may install on any card combination you may think of.

What's not:
- unlike most firmware updates which fix minor things, this one changed a LOT, especially on the display side (for example, LiveView is now quad-buffered and most of the display registers were changed).
- watch out for corrupted frames (from my limited testing, I'm not fully convinced the issue is fully resolved on 1.2.3 => for serious video use, please consider staying on 1.1.3)
- fast zebras not working, but can be fixed
- no full-screen magic zoom (I never used it anyway, but was nice)
- no brightness/contrast/saturation adjutments (registers changed)
- HDMI issues (possibly worse than 113, didn't try yet)
- no documentation (yet).

For photo use (raw overlays, ETTR and so on) it should be just fine (that's how I use it).