Вот - то .что лежит в коробке....jkitan писал(а):
сегодня обещают отослать усе, в последний момент когда заказывал
обнаружил что в коробке вместе с трансмиттером идет еще и ресивер
так что все чуток сэкономили )))
http://cgi.ebay.com/4-Channel-Wireless- ... dZViewItem
Фотографии - с osipoff.ru ( тема - Радиосинхронизатор)
http://www.osipoff.ru/modules.php?op=mo ... 3&start=45
Specification
- Wireless Flash Trigger V2s;
- Brand: Cactus;
- Includes ONE trigger and ONE receiver;
- 4 channels selectable;
- Work with V2/V2s wireless receivers only;
- Dose NOT work with V1 receiver or 16-channel trigger receiver;
- Designed for flashes which (1) comes with a trigger voltage lower than 12V and (2) could not be triggered by V1 or V2 receivers;
Compatible models:
- Canon SpeedLite 580EX II, 580EX, 540EZ, 520EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX;
- Nikon SpeedLite SB-800, SB-600, SB-28, SB-27, SB-26, SB-25, SB-24;
- Olympus FL-50, FL36;
- Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT;
- Sigma EF-500 DG Super, EF-500 DG ST, EF-430;
- Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D;
- Vivitar 285HV (Older Vivitar 285/283 works only with PC sync);
- Other flash models with a trigger voltage of 12V or lower;
- Power Input of Transmitter: L1028 12V 23A small battery (included for testing purpose only);
- Power Input of Receiver: CR2 3V Alkaline battery (included for testing purpose only; please remember to remove the plastic wrapping before use);
- Tested effective area: 10m (open area without interference);
- Maximum triggering voltage via hot shoe: 12V;
- Responding time: 1/500s - 1/1000s (actual sync speed varies from 1/125s to 1/600s depending on the sync speed of flash / strobe);
- One PC sync cable (PC male to 2.5mm plug) is included;
- Receiver comes with PC sync port;
- Radio working frequency: 433MHz;
- Net Weight: 78g.
Here comes the new version of the renowned wireless flash trigger that has been improved over the old version. This trigger set has been tested and proved to be compatible with the largest number of flashes on market. Misfiring problem has been satisfactorily resolved.
This wireless slave flash trigger unit triggers other flash units when the transmitter is activated. Several flash units work together helps fill in shadows and improve the evenness of lighting.
Two components are included in this trigger unit, a transmitter and a receiver. The transmitter is to be attached on the hot shoe of the camera while the receiver is to be attached to external flash. Each receiver works with one flash. You can use as many flashes as you wish as long as you have enough receivers.
With the wireless flash trigger, you can place the flash at different angles and distances from the object. This is particularly useful for portrait and product photography. Most importantly, without the need to connect the flash by wire or cable, you can move the flash to anywhere that produces the best lighting to the object you shoot. Flexibility provides you with the best result.
The transmitter emits radio signal to the receiver when shutter is pressed. Highest responding time is 1/1000s (actual sync speed varies from 1/125s to 1/600s depending on the sync speed of the flash / strobe).
This flash trigger unit has strong anti-interference function and has four channels for you to choose. It is extremely useful if there are several photographers working nearby. Each photographer could choose their own channel to trigger off the external flash unit they are going to use without triggering others’ because of overlapping signals.
This unit can be triggered continuously for 20,000 times. Triggering voltage is only 0.01mAh so it won’t damage the hot shoe of the camera. The energy-saving design allows you to use the unit for a year without having to change the battery inside.
Apart from the flashed listed in Specifications, this V2s edition is also designed for flashes which (1) comes with trigger voltage lower less than or equal to 12V; and (2) could not be triggered by V1 or V2 receivers.
Since the new version runs on different channels, it can only work with V2/V2s receivers and not the previous version. Please purchase the V2/V2s receivers from our eBay store to work with the new version trigger.
***Please note that Cactus trigger sets and receivers are different from other flash triggers available in market. Our triggers and receivers have undergone thorough testing and been confirmed to work with the largest number of flashes on market. We cannot ensure that flash triggers and receivers other than the Cactus brand will be compatible with ours.
CAUTION: Beware not to work via the hot shoe with high voltage flashes or studio strobes with a triggering voltage of 12V or higher; use PC sync port in this instance.
Вход
Регистрация
FAQ
Поиск
